依據標準及測試項目：

依據標準及測試項目：

GB 38448-2019 智能坐便器能效水效限定值及等級

GB/T 34549-2017智能坐便器

GB/T 23131-2019家用和類似用途電坐便器

JG/T 285-2010坐便潔身器

智能坐便器坐圈JD0001-2017

CBMF 15-2016智能坐便器

主要用于評估電子坐便器在使用過程中除臭功能的性能表現。其主要功能包括：

模擬使用環境：測試機能夠模擬實際使用環境中坐便器產生的臭氣，通過特定的裝置釋放模擬臭氣，以模擬用戶在使用坐便器時可能產生的異味。

除臭功能測試：測試機會啟動電子坐便器的除臭功能，并監測臭氣在除臭過程中的變化情況。通過對比除臭前后的臭氣濃度，可以評估除臭功能的效果和效率。

主要要求：

1. 風道上下游配置需符合標準，考慮到防爆要求，風道及閥門采用防爆設計的不銹鋼制作。通道設計亦需滿足標準要求。

2. 采集控制器為2通道氨氣分析儀，測試范圍0~100%，分辨率0.01mg/m3，精度在10%以內。環境內需增設氨氣濃度報警器，以確保安全。傳感器校準需遵循標準要求。用戶應嚴格管理氨氣，并采取防爆措施。

3. 系統集成分為兩部分：管道及樣品安裝部分，以及氨氣濃度分析儀的儀表箱。

4. 在上下游管道旁路各安裝一個調節閥，用于泄壓或排空腔體氣體。

According to standards and testing projects:

GB 38448-2019 Energy Efficiency and Limiting Values of Smart Toilets

GB/T 34549-2017 Smart Toilets

GB/T 23131-2019 Domestic and Similar Uses of Electric Toilets

JG/T 285-2010 Toilet Cleaning Device

JD0001-2017 Smart Seat Toilet

CBMF 15-2016 Smart Toilets

This mainly evaluates the performance of the deodorization function of electronic toilets during use. Its main functions include:

Simulating usage environment: The testing machine can simulate the odors generated by the actual toilet in the actual usage environment. Specific devices are used to release simulated odors to simulate the odors that may be produced by users when using the toilet.

Deodorization function testing: The testing machine will activate the deodorization function of the electronic toilet and monitor the changes in odors during the deodorization process. By comparing the odor concentration before and after deodorization, the effectiveness and efficiency of the deodorization function can be evaluated.

Main requirements:

The upstream and downstream air ducts must meet the standards, and explosion-proof design is required for the ducts and valves, which are made of stainless steel. The channel design must also meet the standard requirements.

The collecting controller is a 2-channel ammonia gas analyzer with a test range of 0~100%, resolution of 0.01mg/m3, and accuracy within 10%. Ammonia gas concentration alarms should be installed in the environment to ensure safety. Calibration of sensors must follow standard requirements. Users should strictly manage ammonia gas and take explosion-proof measures.

System integration is divided into two parts: the pipeline and sample installation parts, as well as the instrument box of the ammonia gas concentration analyzer.

Adjustable valves are installed on both sides of the upstream and downstream pipes for relieving pressure or emptying the gas in the chamber.